Beschreibung

Brandneues Replacement Board für Bally/Williams DMD Controller Board.

Ersetzt A-14039 & A-14039.1

Plug and Play

Board funktioniert in diesen Geräten

Black Rose
Corvette
Creature from the Black Lagoon
Demolition Man
Dr.Who
Dirty Harry
Dracula BSD
Fish Tales
Flintstones
Getaway (HS2)
Gilligans Island
Hot Shots Basketball
Hurricane
Indiana Jones
Indianapolis 500
Jackbot (die letzten hatten WPC95 Boards,bitte vor Kauf kontrollieren)
Johnny Mnemonic
Judge Dredd
No Fear
Party Zone
Popeye
Road Show
Star Trek TNG
Terminator 2
The Addams Family & Gold
The Shadow
Theater of Magic
Twilight Zone
White Water
Who Dunnit
World Cup Soccer


The new XPin? XP-WPCDMD-CTRL uses the latest FPGA

(Field Programmable Gate Array) technology to solve the design issues that

reside in the Williams WPC-S and WPC89 dot matrix controller board.

The XPin? XP-WPCDMD-CTRL replaces all 4 different versions of the D-14039

used in those generation games.


The FPGA circuit design fixes the timing issues associated

with the OEM design which was due in large part

to the IC count and board layout. Utilizing this

FPGA technology, we have added additional test features

which will allow the end user to verify that

this board is functioning as designed and providing an

independent method of testing the dot matrix display

outside of the game software, helping the end

user to determine if a bad display is a bad display and not some

other component in the game.


The FPGA circuit design also allows for an increased

scan rate, which is needed for LED based

dot matrix displays. Original OEM Plasma DMD?s, due to their

technology, have an effect called persistence.

Persistence is the time it takes to go from an

ON state to an OFF state. Persistence in the OEM display?s lasts

~1/1000 of a second. The persistence of an LED is significantly

less then this. The increased scan rate allows

for the LED to stay on for a longer period of time

and reduces the strobing effects associated with LED technology.

A redesigned High Voltage section provides a solid

foundation for the operation of the OEM High Voltage

Plasma Dot displays. Centralized test points allow for easy

voltage measurements.


Though it is not necessary to change your OEM Plasma Display

to work with our new XPin? XP-WPCDMD-CTRL

Controller, you can upgrade your old plasma

display to our new XPin? XP-DMD4096 LED DMD,

in your choice of colors ? Red, Blue, Green, Orange,

Yellow/Green, or Amber (Amber is our color matched Plasma Orange)


Features

Re-Engineered High Voltage section, eliminating shortcomings

in the original OEM design. Debug system independent

from the original game firmware. Allows the user to

verify the functionality of the Controller and dot matrix Display

independent from the game MPU and Firmware.

Multi-rate Scanning. Research has shown that different

games and even different firmware revisions for the same

game can have slightly different scan rates. XPin? has

developed a system to adjust the scan-rate of the

dot matrix display to reduce the flicker that is often times visible

in OEM plasma displays and LED dot matrix displays. Increasing

the scan rate allows for smoother animations.

This multi-rate scanning is part of our Patent Pending

Light Wave Technology.The XPin? XP-WPCDMD-CTRL has a

dipswitch for additional functionality.The table below defines

what is available. When referencing SCAN RATE,the DMD

display has a certain refresh rate that is dependant on

factors suchas Game firmware and firmware revision.

Though not easily seen with theoriginal OEM plasma displays,

with LED displays these variations of scan ratescan be

noticed during normal game operation, causing a ?flickering?

effect.XPin? LightWave Technology, utilizing innovative

hardware circuit design,mitigates this effect by allowing the

user to increase the scan rate of thedisplay. Not all games

will require the 4x Scan Rate setting, but it is a

userpreference.Installation


Installation Time: About 20 minutes

Tools Required: 1/4? Nut-driver, Phillips screwdriver

1. Unplug the AC power from your pinball machine. Remove

game backglass.Open back box.

2. Remove OEM WPC DMD Controller board

3. Install the XP-WPCDMD-CTRL in the back box

4. Connect all connectors as indicated. Make sure to connect all ribbon cables with proper Pin 1 orientation

5. Double-check all connections, plug in the machine, and turn the game on.

6. All systems should be operational! Play on!